Creator C500 Auto Diagnostic Scanner Software Update Instruction

Newest Creator C500 is a handheld auto diagnostic scanner for OBDII & EOBD, BMW & Mini, Honda & Acura. Creator C500 can support online, If you wanna know how to update creator c500 software, please just follow us.


Creator C500  software update Step-by-step procedure:

Step 1. Setup Update tools

Download the update tool from official website

Double click the [Setup file] to setup the tool. Operate follow the instructions, and finish to setup.

After finish setup, there will be a icon of scanner in desktop.

Step 2. Download the software

Download from official website

Note: C100 and C110 software is only fix SN is C1XX 002000 02 or later

You can find the software what you want.

Step 3. Run the update tool

Double cleck the update tool icon and Run the update tool and Operate in accordance with photographs

Used the USB cable connected to scanner and PC, if connect success, the software on pc will shown as below

Click [Update] button.

Cleck red rang , you can change the path , and find the updatefile which recive.

Select update file and click [open] button.

Into the upgrade interface, wait for the end of upgrade

WARNNING:

Do not power off during upgrade!

Do not Plug or Unplug USB tools during upgrade!

Step 4. Start Update

Waiting for a few minutes. The software will update the scanner tool.

Finish Update.

When the update is finished , the screen on PC will show as below.

If update success, the software will display [Update success!];

if update fail, it will display [Update fail! Try again].

Press [finish], the scanner is already updated, and you can unplug the scanner from PC.

More information about Creator C500, please visit VOBDII.COM or contact us, then you will get further details.